Blue Cell Phone Bluetooth Speakers , Portable Speakers For Cell
It is 1 channel Bluetooth speaker that can be wirelessly connected
to Bluetooth devices such as smart phones, tablets and computers to
playback any music collection stored on them. Thanks to its
powerful battery, the system delivers full stereo sound, separate
from any mains supply,for up to3-6 hours and is the perfect
companion for the park, whilst camping or on the beach. Process
control,can get rid of complicated connections and wiring distance
constraints ,the user can enjoy high quality music.
Turn on the speaker and the Blue led will be flashing to enter into
pairing mode. Pairing time is around 3-10 seconds (varied by the
audio device). A sound will be out with successful pairing and you
could enjoy the music wirelessly.
Connect to mobile phones / tablet PCs / computers:
1. Activate your phone’s Bluetooth
2. Go to your phone’s Bluetooth settings, scan for new Bluetooth
3. Upon device found ( BT speaker ) , click the device name and
pair with it
4. If your phone ask for pairing code,please enter “0000” and
5. After successful pairing, your speaker will sound a prompt tone
and the power LED Lights blue.
External audio Function:
Plug the Micro USB Cable audio extension cable to speakers and
audio devices under power on status.
Audio input connector ; Micro USB Cable to support external audio
Charging interface:Micro USB Cable
Dimension: H83 * ф71MM
1. Micro USB cable ( for charging)
2. Micro USB cable (Aux input cable)
3. User Manual
Bluetooth 3.0 Classll support the A2DP V1.2 , AVRCP V1.4 profiles
Transmission distance:10M (transmission distance is different due
to different environmental factors and audio device)
Maximum output power:3W*1
Channels Single channels
Signal to noise ratio S / N :≥80dB
Frequency Range : 180Hz - 20KHz
Distortion THD : ≤ 1%
Speaker unit : outer diameter 40mm , inner magnet , 4 ohms, 3W
Parameters of power :
Rated voltage : 3.7V DC
Battery : built - in lithium battery , 3.7V / 350 mAH
Charge voltage : 5V ± 0.25V
Charging time : 3 - 4 hours
1. Bluetooth status : blue light flash
2. Line in mode : green light flash
3. Charging status : red light flash
4. Charging completed : red light off
Connect the micro USB charging cable to a computer or USB charger ,
red Led indication for charging status.
No Need to install the Bluetooth software if computer itself has
the Bluetooth function ; Install the Bluetooth software first if
computer don’t have Bluetooth;
1. Click the Bluetooth icon on the right corner of computer and
select the “Add the equipment”
2. It will search the Bluetooth devices automatically and speaker
will be showed;
3. Turn on the speaker and computer will auto install the driver
and will show succeed to install
4. If you need to enter a password to the pairing process , please
enter “ 0000 ”
5. Please use the media center from computer itself , if need to
adjust the next or previous songs after connecting with Bluetooth
Handsfree , Volumn songs adjustment Switch operation:
Answer / end a call
During Bluetooth status , short press key to answer the incoming
call , short press again to end the call and back to play music
Lgnore incoming call
Long press key for 5 sec to open the bluetooth
Remarks: Under Bluetooth mode when the 3.5mm audio plug is inserted
in , the speaker will switch to line in status automatically;
Note: please switch off the speaker if don’t use, to prevent power
1. My mobile phone can’t find any new Bluetooth device?
A. Make sure the Bluetooth speaker has entered pairing mode;
B. Ensure the speaker is within the effective working range;
2. Bluetooth devices can’t pair up
A. Make sure your mobile phone allows new connection , did not
reach the maximum allowed connection number , please ref to your
mobile’s user manual
B. Make sure the pairing password entered is “ 0000 ”.If your are
using a Bluetooth transmitter device , please ensure the responding
password of your Bluetooth transmitter supports “ 0000 ”code.
3. My mini speaker does not play music / answer call when it
connected to a Bluetooth mobile phone?
A. Make sure your Bluetooth mobile phone supports A2DP and HSF (
handsfree ) profile;
B. Ensure your Bluetooth cell phone is within effective working
4. When paired with my computer , windows ask for new driver ? Can
you supply ?
A. We can’t supply.The Bluetooth A2DP / HSF drivers may required to
play stereo sound via Bluetooth connection. But the driver is
actually needed for the Bluetooth module’s manufacturer for driver
5. Why can’t remotely control the pause,play, previous song and
skip track functions with the speaker when playing music?
A .When you are using Micro USB Cable audio in connection,you can’t
pause, change vilume or skip tracks with the buttons on the speaker
B. This feature needs the Bluetooth devices paired with the speaker
to support AVRCP ( Audio/Video Remote Control Profile). Please make
sure your cell phone or other Bluetooth device supports AVRCP.
Read the following recommendations before using the bluetooth
A. Keep it dry and don’t take it to damp places to avoid the
product’s internal circuit being affected.
B. Keep the product away from direct sunlight or hot places . High
temperatures will shorten the life of electronic devices ,destroy
the battery or distort certain plastic parts.
C. Don’t expose the product to extremely cold area. It may damage
the internal circuit board.
D. Don’t try to disassemble the product as it may get damaged if
you are not professional.
E. Don’t let it fall down onto the floor or other hard surfaces.The
internal circuit might get damaged.
F. Don’t use intensive chemical products or detergent to clean the
G. Don’t scratch the surface with sharp tips.